How To Change Battery In Mazda Key Fob 2014. Make sure the positive (+) symbol is facing you. Try to pry it apart as evenly as possible, so the plastic doesn’t break on you.
The positive is on top, while the negative side of the button cell. Do so gently, with the screwdriver wrapped in tape to prevent damaging the key fob. Replace the battery cap and key fob cover.
With The Battery Cover Off, You Will See The Battery.
Take the battery out, and be mindful of the small rubber ring underneath. Reinsert the auxiliary key and you’re ready to hit the road! These steps are the same for any of the three mazda key fobs.
Place The Key On The Ignition And Turn It Once To The On Position.
After chime, press any fob key twice. Gently pull the battery out and note the part number. The document has moved here.
There Is A Small Battery Cover.
Its submitted by doling out in the best field. Make sure that the two halves of the fob are flush together at every edge. Once the slots are open, look down the side of the key fob.
Follow These Steps To Replace The Battery:
Take the flathead screwdriver, and use it to pry open the case on both sides. If scratched, you’ll want to replace it before continuing. Pull out the dead key fob battery from the mazda keyless remote.
This Should Open The Shell Completely.
Remove the battery cap to expose the battery. Do so gently, with the screwdriver wrapped in tape to prevent damaging the key fob. Cr1620 coin battery 🪙 you need: