How To Reset Oil Change Light On Jeep Wrangler 2021. Scroll to where the “ oil life ” is selected. While the oil life is displayed, press and hold the ok button until the oil life is reset to 100%.
Besides, how do i reset my jeep wrangler? Turn the ignition keys to the run position or press the start button twice without turning the engine. Once done, you can verify it’s good to go by navigating in the menu system to see that the oil.
Then, You Will Need To Start The Vehicle And Check If The Oil Light Reset Is Still On The Screen.
So let’s going to reset the oil change indicator with these simple steps: Use your steering wheel navigation to access the dash’s “vehicle info” section. Turn the ignition off and start the engine to verify the.
Follow The Steps After You Change Your Oil And Make That Pesky Light Disappear.
From here, navigate to “oil life”. It’s very easy to reset your oil change light on the jeep wrangler jk. Use the buttons on the steering wheel to select “ ok “, then use the arrows to toggle the selection to “ vehicle info “.
Press And Hold The “ Ok ” Button Until The Oil Life Is Reset To 100%.
As soon as the chime stop, press the gas pedal all the way to the floor three times. Now turn the key to the off position. Put the negative battery clamp back onto the negative battery terminal and tighten.
Loosen The Bolt On The Negative Battery Clamp Using A Ratchet And Socket.
Set the gear to the park position. Turn the ignition off and start the engine to verify the indicator has been reset. You can reset the engine oil change light on the jeep wrangler by following these steps.
Wait 30 Minutes For The Computer To Reset Itself.
Once you’ve done that, the lights will flash and you have 10 seconds in which time you. Insert the key into the ignition and then turn it the run position or one step before the start. Depress the ok button and hold it until the jeep wrangler oil life percentage.